screw feeding
Klausen Process Machinery’s Vacuum Conveying Systems provide efficient, enclosed transfer of powders and granulated materials from a wide range of sources including storage bins, bags, bulk bags, drums, and silos.
The system utilises a rotary vane vacuum pump to generate negative pressure within the receiver and conveying line. When the receiver valve is closed, a vacuum is created, drawing material through the suction wand and along the pipeline into the receiver vessel.
An integrated filtration system separates dust and fine particles from the air stream, preventing contamination and protecting the vacuum pump. Once the receiver reaches capacity, the vacuum pump stops and the discharge valve opens, allowing material to be released for downstream processing.
At the same time, compressed air is discharged from the air reservoir to clean the filter, maintaining consistent airflow and system efficiency. After discharge, the valve closes, the pump restarts, and the conveying cycle repeats.
System operation is controlled via PLC, allowing adjustment of suction and discharge timing. Conveying cycles can also be managed using level sensors or external control signals for seamless integration into automated processes.
The system utilises a rotary vane vacuum pump to generate negative pressure within the receiver and conveying line. When the receiver valve is closed, a vacuum is created, drawing material through the suction wand and along the pipeline into the receiver vessel.
An integrated filtration system separates dust and fine particles from the air stream, preventing contamination and protecting the vacuum pump. Once the receiver reaches capacity, the vacuum pump stops and the discharge valve opens, allowing material to be released for downstream processing.
At the same time, compressed air is discharged from the air reservoir to clean the filter, maintaining consistent airflow and system efficiency. After discharge, the valve closes, the pump restarts, and the conveying cycle repeats.
System operation is controlled via PLC, allowing adjustment of suction and discharge timing. Conveying cycles can also be managed using level sensors or external control signals for seamless integration into automated processes.
Key Features:
- Enclosed conveying of powders and granulated materials
- Suitable for bins, bags, bulk bags, drums, and silos
- Rotary vane vacuum pump for reliable vacuum generation
- Continuous material transfer via controlled negative pressure
- Integrated filtration system to protect equipment and reduce dust
- Automatic discharge cycle with filter cleaning via compressed air
- PLC controlled operation for adjustable cycle timing
- Compatible with level sensors and external control systems
- Consistent, low maintenance conveying performance